Outrigger hardware made in Sweden by Bengt Björkhage!
Contact BB Hardware by Email.
Super Light Weight .21-size Outrigger Rudder- Material: 7075-T6 aluminum in rudder blade, pivot mount & rudder bracket.
- Total weight as in the pictures: 29 g (1.02oz).
- 3 mm pivot shaft with dual metal bushings.
- Rudder blade length: 88 mm (below the bracket).
- Rudder blade width/cord: 17.8 mm (.7") , 20.3 mm (.8") or 22.8 mm (.9").
- Rudder blade trailing edge thickness: 2.9 mm (.11") @ 20.3 mm width.
- Mounting holes through transom: 3 mm (use M3 or 4-40 screws).
- Rudder blade mounting threads: 6-32 (top) & 4-40 (bottom).
- Spares will also be available.
- Drawings will be published at a later date...
- Price: 595:- SEK (including 25% VAT)
Super Light Weight .21-size Outrigger Strut- The strut design is based on the trusted CMD style - but lighter!
- Material: 7075-T6 aluminum in strut and 6061 in the T-bracket.
- Total weight as in pictures: 19 g (0.67oz).
- 1/4" hole in strut for K&S 1/4" brass tubing (the hole is a little tight so you need to clear it a little).
- There will be a strut available with 3/16" bushings also.
- Round bottomed strut.
- The strut/T-bracket mounting accepts a M4 or 8-32 screw.
- The T-bracket mounts with M3 or 4-40 screws to the transom (3 mm holes).
- Drawings will be published at a later date...
- Price: 255:- SEK (including 25% VAT)
Light Weight .21-size Engine Mount Rails- They're based on CMD/Eagle hole spacing and overall design = drop-in design for any Eagle 21 or Kep's 21 rigger.
- Material: 7075-T6 aluminum.
- Weight (pair): 16 g (0.56oz)
- Mounting hole C-C spacing: 51 mm (2").
- Mounting hole threads: 1/4"-20 UNC = use normal nylon 1/4-20 wing bolts.
- Engine mounting hole spacing: 21 mm - most .21 sized engines like CMB, Mac, NR & TP will fit.
- Engine mount holes: 2.5 mm - not threaded - use either a 4-40 thread forming tap or a M3 tap.
- It will also be available complete with rubber grommets for either 1/8, 3/16" or 1/4" tub sides and nylon screws.
0 comments:
Post a Comment